STRICT QUALITY CONTROL SYSTEM

PVC Lubricant Processing Aid

PVC Lubricant Processing Aid

PVC Lubricant Processing Aid

Lubricating processing aids are high molecular weight co-polymers with excellent metal release property, which can avoid the adhesion between PVC melt and metal inner surface.It is designed to offer maximum dispersity in rigid PVC production. 


PRODUCT INTRODUCTION

Why Choose our Lubricating processing aids ?

Adding our FINE-ADD series lubricating processing aids helps to reduce friction and lower melt viscosity, ensuring smooth flow during PVC products manufacturing and meanwhile with no migration and precipitation of small molecules On the surface of the product.

It can highly improve the process-ability & fluidity with lower dosage, avoid hot metal surface sticking ,reduce the frequency and time of mold cleaning, prolong the production cycle with higher efficiency.

Also it can largely promote surface glossiness of PVC finished products in diverse plastic formulations without any negative effects on the mechanical properties .

Increase out put rate.


Frequently Asked Questions

Which lubricant processing aid grade do you supply?

We supply ACR-175 as our PVC lubricant processing aid grade.

What are the specifications of ACR-175?

Bulk density 0.45±0.10 g/cm³, sieve residue (30 mesh) ≤2.0%, volatile content ≤1.5%, intrinsic viscosity 0.7±0.2.

How does it differ from your general processing aid?

ACR-175 sits at a lower intrinsic viscosity (0.7±0.2) than our general processing aids (4.5-6.6). The lower viscosity grade is used where a stronger lubricating and release effect is needed alongside fusion promotion. More detail in our acrylic processing aid guide.

Request a Sample or the Full Technical Data Sheet

Tell us your application, PVC grade and target dosage and we will send the matching technical data sheet together with a free sample. Email info@fine-additive.com or call +86-186-6060-2416. Formulation and processing troubleshooting support is available on request.

Transparent Processing Aid for rigid profile extrusion

PRODUCT PARAMETERS

Typical Specifications of Lubricant processing aid

Item

Unit

ACR-175

Bulk density

g/cm3

0.45±0.10

Sieve residue (30 mesh)

%

≤2.0

Volatile content

%

≤1.5

Intrinsic viscosity

η

0.7±0.2



Applications of Lubricating processing aids

Recommended for all kinds of PVC window profile ,PVC door,PVC fencing,PVC clear film, PVC clear sheet, PVC bottle,PVC foam board etc.
Suggesting dosage 1.0-2.5kg ACR-175 per 100kg PVC resin.


PACKING AND STORAGE

PACKING AND STORAGE

25kg/bag with PP valve bag and PE inner bag or 500kg/sack.

It should be stored in cool and dry surroundings with shelf life of two years,it can be used if qualified by inspection after shelf life

Surface gloss improvement additive for plastic sheets

INQUIRE IMMEDIATELY

+86-186-6060-2416

info@fine-additive.com