How does Our PVC Foam Regulator work?
Promote the fusion of PVC compound
Ultra-high melt strength can effectively enhance the melt strength of PVC , encapsulate the bubbles released by the foaming agent, prevent bubble from merging and breaking,So as to obtain foamed PVC products with uniform cell structure and low density.

Frequently Asked Questions
Which PVC foam regulator grades do you supply?
We supply PA-530 and ACR901, a higher-viscosity series intended for foamed PVC.
What are the specifications?
Both grades have bulk density 0.45±0.10 g/cm³, sieve residue (30 mesh) ≤2.0% and volatile content ≤1.3%. Intrinsic viscosity is 11.0-13.0 for PA-530 and 13.0-14.0 for ACR901 - substantially higher than our general processing aid grades.
Which grade should I use for PVC foam board?
Both foam regulator grades sit at a much higher intrinsic viscosity than general processing aids, which is what sustains cell structure at high extrusion speed. If cells are still collapsing in fast foam board lines, see our guide on eliminating cell collapse in high-speed PVC foam extrusion before changing the rest of the formulation.
Request a Sample or the Full Technical Data Sheet
Tell us your application, PVC grade and target dosage and we will send the matching technical data sheet together with a free sample. Email info@fine-additive.com or call +86-186-6060-2416. Formulation and processing troubleshooting support is available on request.