STRICT QUALITY CONTROL SYSTEM

ACM Impact Modifier(ACM)

ACM Impact Modifier(ACM)

ACM Impact Modifier(ACM)

ACM Impact Modifier - Acrylate CPE Modifier is an unique PVC impact modifier which is an interpenetrating network copolymer (IPN ) with the structure of chlorinated HDPE(CPE)grafted Polyacrylate . It's a special low-temperature toughening agent.

Our ACM Impact Modifier endow more balanced impact strength and better toughness in the processing of PVC products under low temperature and its weather-resistance is better than that of CPE/MBS, making it suitable for products like PVC pipes, fittings and injections molding PVC ,WPC foaming profiles which can used in colder environments.

PRODUCT INTRODUCTION

Why choose our ACM Impact Modifier

Performance comparison of our ACM with other impact modifiers

Parameter

CPE

AIM

MBS

ACM

Weather-resistance

●●●

●●●●●

●

●●●●

Toughness

●●●●

●●●

●●●

●●●●●

Impact strength

●●●

●●●●

●●●●●

●●●●

Fusion property

●●●

●●●●

●●●

●●●●

Molecular structure

Linear

Core-shell

Core-shell

IPN


Frequently Asked Questions

What is the molecular structure of ACM impact modifier?

ACM uses an IPN (interpenetrating polymer network) structure, which is what gives it the highest toughness rating in our comparison table.

How does ACM compare with CPE, AIM and MBS?

ACM leads on toughness, scores four levels out of five for weather-resistance, impact strength and fusion property, and sits between AIM and MBS on cost. Full breakdown in the CPE 135A vs ACR vs MBS selection guide.

When should I choose ACM instead of acrylic AIM?

ACM is the pick when toughness is the priority. Its IPN structure delivers the highest toughness rating in our comparison, while plain AIM scores higher on weatherability.

Request a Sample or the Full Technical Data Sheet

Tell us your application, PVC grade and target dosage and we will send the matching technical data sheet together with a free sample. Email info@fine-additive.com or call +86-186-6060-2416. Formulation and processing troubleshooting support is available on request.

ACM Impact Modifier white powder for PVC

The different structure of PVC resin combined with impact modifiers 

PRODUCT PARAMETERS

Specifications of ACM Impact Modifier

Item

Unit

ACM-24

ACM-69

Appearance

-

White powder

White powder

Bulk density

g/cm3

0.45±0.05

0.45±0.05

Sieve residue (30mesh)

%

≤2.0

≤2.0

Volatile content

%

≤1.5

≤1.5

PACKING AND STORAGE

PACKING AND STORAGE

25kg/bag PP valve bag with PE liner or super sack .

The Product should be stored in cool ,dry and ventilated area.Shelf- life of two years, it can be still used if qualified by inspection after shelf life.

Low-temperature PVC impact modifier ACM-24
ACM Impact Modifier for injection-molded PVC

INQUIRE IMMEDIATELY

+86-186-6060-2416

info@fine-additive.com