STRICT QUALITY CONTROL SYSTEM

Acrylic Impact Modifier (AIM)

Acrylic Impact Modifier (AIM)

Acrylic Impact Modifier (AIM)

Acrylic Impact Modifier is an acrylic copolymer with a core-shell structure, the core can effectively transfer the external impact energy into heat and the shell has the good compatibility with PVC matrix.

Our Acrylic-based Impact Modifiers (AIM) are designed to provide optimal cost ,improve mechanical performance and durability of rigid & flexible PVC applications and injection molding applications. 

PRODUCT INTRODUCTION

Why choose our Acrylic Impact Modifier

The low dosage of our AIM may impart PVC finished products with high-impact resistance requirements with excellent impact-strength, weather resistance and color durability, UV resistant especially under long-period exposure to outdoor conditions.

  • Excellent processing performance and compatibility with PVC resin

  • Super long-period weather-resistance

  • Better thermal stability and surface glossiness

  • Higher impact-strength

  • Uniform particle size and low dust, no caking under long-term storage

Frequently Asked Questions

Which AIM grades do you supply?

We supply three acrylic impact modifier grades: AIM-334, AIM-50 and AIM-55.

What are the typical specifications?

All three grades share the same envelope: bulk density 0.45±0.10 g/cm³, sieve residue (30 mesh) ≤2.0% and volatile content ≤1.0%.

How does acrylic impact modifier compare with CPE, MBS and ACM?

In our published comparison, AIM scores highest on weather-resistance (five levels) among CPE, AIM, MBS and ACM, with core-shell molecular structure. ACM leads on toughness while MBS leads on impact strength. See the full CPE 135A vs ACR vs MBS selection guide.

Is AIM suitable for outdoor PVC applications?

Yes. AIM shows the strongest weather-resistance of the four impact modifiers we compare, which makes acrylic grades a common choice for outdoor profiles and window applications where weathering resistance matters.

Request a Sample or the Full Technical Data Sheet

Tell us your application, PVC grade and target dosage and we will send the matching technical data sheet together with a free sample. Email info@fine-additive.com or call +86-186-6060-2416. Formulation and processing troubleshooting support is available on request.

Acrylic Impact Modifier for PVC profiles

PRODUCT PARAMETERS

Specification of Acrylic Impact Modifier  

 Items

Unit

AIM-334

AIM-50

AIM-55

Bulk density

g/cm3

0.45±0.10

0.45±0.10

0.45±0.10

Sieve residue (30 mesh )

%

≤2.0

≤2.0

≤2.0

Volatile content

%

≤1.0

≤1.0

≤1.0

 

Widely used in the nondeformable PVC rigid products and some engineer plastics, such as PVC profiles, windows, siding, fence, deck, pipe, siding and weatherable building products.

Suggestion dosage:4.0-6.0kg per 100kg PVC resin.

PACKING AND STORAGE

PACKING AND STORAGE

25kg/bag PP valve bag with PE liner or super sack .

The Product should be stored in cool ,dry and ventilated area.Shelf- life of two years, it can be still used if qualified by inspection after shelf life.

AIM enhances impact resistance in PVC

INQUIRE IMMEDIATELY

+86-186-6060-2416

info@fine-additive.com